Digital Prankster http://blog.dig.io いつか役立つ備忘録 Sun, 18 Oct 2009 16:24:40 +0000 http://wordpress.org/?v=2.8.4 ja hourly 1 MacBookProのバッテリは調節しないほうがいい？ http://blog.dig.io/2009/10/19/macbookpro%e3%81%ae%e3%83%90%e3%83%83%e3%83%86%e3%83%aa%e3%81%af%e8%aa%bf%e7%af%80%e3%81%97%e3%81%aa%e3%81%84%e3%81%bb%e3%81%86%e3%81%8c%e3%81%84%e3%81%84%ef%bc%9f/ http://blog.dig.io/2009/10/19/macbookpro%e3%81%ae%e3%83%90%e3%83%83%e3%83%86%e3%83%aa%e3%81%af%e8%aa%bf%e7%af%80%e3%81%97%e3%81%aa%e3%81%84%e3%81%bb%e3%81%86%e3%81%8c%e3%81%84%e3%81%84%ef%bc%9f/#comments Sun, 18 Oct 2009 16:16:13 +0000 digio http://blog.dig.io/?p=112 MacBookPro15inch SDカードモデルの修理用バッテリ供給が滞っている

という記事を見て，ふと現在のバッテリ状況を確認してみた．

Screen shot 2009-10-19 at 12.30.49 AM

1年で公称値より3%減．

先回MacBookProのバッテリを調節の効果を検証したが

あれから半年以上バッテリ調整はしていない．
思ったより容量の減少は緩やかである．

このままのペースで使用頻度に対して線形的に容量が減少すると仮定すると，
頻繁にバッテリ調整を繰り返したPowerBookG4より容量減少を抑えられるかもしれない．

バッテリ調整は本当に必要なのだろうか？

これでは儀式と揶揄されても反論できないな，

]]> http://blog.dig.io/2009/10/19/macbookpro%e3%81%ae%e3%83%90%e3%83%83%e3%83%86%e3%83%aa%e3%81%af%e8%aa%bf%e7%af%80%e3%81%97%e3%81%aa%e3%81%84%e3%81%bb%e3%81%86%e3%81%8c%e3%81%84%e3%81%84%ef%bc%9f/feed/ 0 Spotlight server is disabled. http://blog.dig.io/2009/10/07/spotlight-server-is-disabled/ http://blog.dig.io/2009/10/07/spotlight-server-is-disabled/#comments Wed, 07 Oct 2009 13:13:10 +0000 digio http://blog.dig.io/?p=104 10.5でSpotlightをOFFにしてSnowLeopardをインストールした場合，ネットワーク環境のみを引き継いだが，Spotlightを含むサーバーのデーモン設定も引き継いでしまったらしい．

普段，Spotlightのインデックス作成によるパフォーマンス低下に悩みOFFにしたものの，どうしても必要になったためONにしようと思ったが，一筋縄でいかないようだ．

まず

sh-3.2# mdutil -i on /
Spotlight server is disabled.

Jesus！

逆の手順でSpotlightを有効化しようと試みるが

/System/Library/LaunchAgents/com.apple.Spotlight.plist

が見つからず．(10.6から無くなった？)

とりあえず

sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist

にて

mdsを有効化．

とりあえずインデックス作成は始まったようだ．

Screen shot 2009-10-07 at 10.07.30 PM

インデックス化する必要ないボリュームやディレクトリを指定して，放置．

Screen shot 2009-10-07 at 10.09.54 PM

ただいま放置中であるが，IntelSSD&SnowLeopardに置けるSpotlight検索のパフォーマンス，及びインデックス作成の負荷，パフォーマンスを後日レポートしたい．

]]> http://blog.dig.io/2009/10/07/spotlight-server-is-disabled/feed/ 0 Snow Leopard のパフォーマンス http://blog.dig.io/2009/09/23/snow-leopard-demo/ http://blog.dig.io/2009/09/23/snow-leopard-demo/#comments Wed, 23 Sep 2009 02:10:26 +0000 digio http://blog.dig.io/?p=99 Just a little bit Fast!!

]]> http://blog.dig.io/2009/09/23/snow-leopard-demo/feed/ 0 Jesus!! http://blog.dig.io/2009/09/22/jesus/ http://blog.dig.io/2009/09/22/jesus/#comments Tue, 22 Sep 2009 12:01:50 +0000 digio http://blog.dig.io/?p=94 テレビが見られない．

IMG_4869

仕事が一つ増えた．．．orz

]]> http://blog.dig.io/2009/09/22/jesus/feed/ 0 ウイルスバスター2010 http://blog.dig.io/2009/09/11/%e3%82%a6%e3%82%a4%e3%83%ab%e3%82%b9%e3%83%90%e3%82%b9%e3%82%bf%e3%83%bc2010/ http://blog.dig.io/2009/09/11/%e3%82%a6%e3%82%a4%e3%83%ab%e3%82%b9%e3%83%90%e3%82%b9%e3%82%bf%e3%83%bc2010/#comments Thu, 10 Sep 2009 16:02:22 +0000 digio http://blog.dig.io/?p=88 各社からウイルス対策ソフトの新バージョンが発表される中

Macも対象にしたパッケージが目立ちます．

数年ぶりにウイルス対策ソフトを購入しました．

ウイルスバスター2010

購入した理由

  • 1ライセンスで3台までインストール可能．
  • 1ライセンスでWin&Mac OK
  • ダウンロードパッケージで￥4980/年と安い．
  • TVCMを見て(一日3回は見る…)
  • CMのタレントが好き(仲間リサ)<-mod’s hairのCMにも出てるね

ダウンロードしてインストールしてみたら

Screen shot 2009-09-11 at 12.46.05 AM

SnowLeopar未対応

SnowLeopard発売とのタイミングで，てっきり対応済かと思っていた．残念．

とりあえずウンコビスタに放り込んでみます．

]]> http://blog.dig.io/2009/09/11/%e3%82%a6%e3%82%a4%e3%83%ab%e3%82%b9%e3%83%90%e3%82%b9%e3%82%bf%e3%83%bc2010/feed/ 0 Intel SSD@ MacBook Pro http://blog.dig.io/2009/09/05/intel-ssd-macbook-pro/ http://blog.dig.io/2009/09/05/intel-ssd-macbook-pro/#comments Sat, 05 Sep 2009 04:33:58 +0000 digio http://blog.digio.info/?p=71 以前から注目していたIntel SSD X25-M Mainstream SATA SSD SSDSA2MH160G2C1

不具合が解消された新ファームウェア版をドスパラでゲット．

3.5inchアダプタが同梱されているがノートに使うのでマジ要らない．

img_47951

Intel SSD X25-M Mainstream SATA SSD SSDSA2MH160G2C1

SnowLeopard乗り換えが良い機会なので，早速インストールする．

光学ドライブの代わりにHDDをインストールするにはHDDマウンタが必要．(以前秋葉館で購入した)

既存のHDDをセカンダリ，SSDをプライマリにドライブにインストール．

SSDをプライマリにした理由は，MacBookProがスリープに入ったときにセカンダリのドライブをOFFにしてしまうからだ．

img_48031

開腹　付属のSSDステッカーを貼ってみる

img_4805

SnowLeopardをインストール

Logitecの外付けドライブは読み込みが異常に遅く，インストールに30分程度費やす．

SnowLeopardのウリである，高速インストールは全く体感できなかった．

さて，早速であるが

一番気になるベンチマークは，

ssd

Xbench HDD & SSD

ベンチマークのスコアは申し分ない.

CS4, Office2008などをインストールしてパフォーマンスを確認．

Extensionてんこ盛りのFirefoxでもCS4でも確かにキビキビしている．

詳しいレポートは割愛するが，直感として

SnowLeopardがHDDでも十分早いので，

あんま変わらない，ってか分かんない．

これが結論です．

でも以前eSataでHDD RAID0を組んだ時とあんま変わらない．

現時点の結論: 費用対効果はあまりない．

]]> http://blog.dig.io/2009/09/05/intel-ssd-macbook-pro/feed/ 0 Symfony@さくらインターネット http://blog.dig.io/2009/05/25/symfony%e3%81%95%e3%81%8f%e3%82%89%e3%82%a4%e3%83%b3%e3%82%bf%e3%83%bc%e3%83%8d%e3%83%83%e3%83%88/ http://blog.dig.io/2009/05/25/symfony%e3%81%95%e3%81%8f%e3%82%89%e3%82%a4%e3%83%b3%e3%82%bf%e3%83%bc%e3%83%8d%e3%83%83%e3%83%88/#comments Mon, 25 May 2009 11:51:17 +0000 digio http://blog.digio.info/?p=61 さくらインターネットのウェブサーバーがデフォルトでPHP5に対応してからずいぶん経った．

過去には自前でPHP5，Symfonyをインストールしたが，もっとスマートな環境を目指したい．ということで．

こちらを参考

http://ueblog.natural-wave.com/2008/06/15/sakura-symfony/

]]> http://blog.dig.io/2009/05/25/symfony%e3%81%95%e3%81%8f%e3%82%89%e3%82%a4%e3%83%b3%e3%82%bf%e3%83%bc%e3%83%8d%e3%83%83%e3%83%88/feed/ 0 MacでSymfony http://blog.dig.io/2009/05/25/mac%e3%81%a7symfony/ http://blog.dig.io/2009/05/25/mac%e3%81%a7symfony/#comments Mon, 25 May 2009 07:10:36 +0000 digio http://blog.digio.info/?p=56 Portsをインストールしたところで、いざ、Symfony。

その前にPearからインストールしたいので、Pearをインストール。

sh-3.2# port

[Users/***] > install php5 +apache2 +mysql5 +pear
—>  Fetching apr
—>  Attempting to fetch apr-1.3.3.tar.bz2 from ftp://ftp.infoscience.co.jp/pub/net/apache/dist/apr
—>  Verifying checksum(s) for apr
—>  Extracting apr
—>  Configuring apr
—>  Building apr
—>  Staging apr into destroot
—>  Installing apr @1.3.3_1
—>  Activating apr @1.3.3_1
—>  Cleaning apr
—>  Fetching db46
—>  Attempting to fetch patch.4.6.21.1 from http://distfiles.macports.org/db4/4.6.21_5
—>  Attempting to fetch patch.4.6.21.2 from http://distfiles.macports.org/db4/4.6.21_5
—>  Attempting to fetch patch.4.6.21.3 from http://distfiles.macports.org/db4/4.6.21_5
—>  Attempting to fetch db-4.6.21.tar.gz from http://distfiles.macports.org/db4/4.6.21_5
—>  Verifying checksum(s) for db46
—>  Extracting db46
—>  Applying patches to db46
—>  Configuring db46
—>  Building db46
—>  Staging db46 into destroot
—>  Installing db46 @4.6.21_5
—>  Activating db46 @4.6.21_5
—>  Cleaning db46
—>  Fetching expat
—>  Attempting to fetch expat-2.0.1.tar.gz from http://nchc.dl.sourceforge.net/expat
—>  Verifying checksum(s) for expat
—>  Extracting expat
—>  Configuring expat
—>  Building expat
—>  Staging expat into destroot
—>  Installing expat @2.0.1_0
—>  Activating expat @2.0.1_0
—>  Cleaning expat
—>  Fetching gperf
—>  Attempting to fetch gperf-3.0.4.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/gperf
—>  Attempting to fetch gperf-3.0.4.tar.gz from http://distfiles.macports.org/gperf
—>  Verifying checksum(s) for gperf
—>  Extracting gperf
—>  Configuring gperf
—>  Building gperf
—>  Staging gperf into destroot
—>  Installing gperf @3.0.4_0
—>  Activating gperf @3.0.4_0
—>  Cleaning gperf
—>  Fetching libiconv
—>  Attempting to fetch libiconv-1.12.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/libiconv
—>  Attempting to fetch libiconv-1.12.tar.gz from http://distfiles.macports.org/libiconv
—>  Verifying checksum(s) for libiconv
—>  Extracting libiconv
—>  Applying patches to libiconv
—>  Configuring libiconv
—>  Building libiconv
—>  Staging libiconv into destroot
—>  Installing libiconv @1.12_2
—>  Activating libiconv @1.12_2
—>  Cleaning libiconv
—>  Fetching zlib
—>  Attempting to fetch zlib-1.2.3.tar.bz2 from http://nchc.dl.sourceforge.net/libpng
—>  Verifying checksum(s) for zlib
—>  Extracting zlib
—>  Applying patches to zlib
—>  Configuring zlib
—>  Building zlib
—>  Staging zlib into destroot
—>  Installing zlib @1.2.3_2
—>  Activating zlib @1.2.3_2
—>  Cleaning zlib
—>  Fetching openssl
—>  Attempting to fetch openssl-0.9.8k.tar.gz from http://distfiles.macports.org/openssl
—>  Verifying checksum(s) for openssl
—>  Extracting openssl
—>  Applying patches to openssl
—>  Configuring openssl
—>  Building openssl
—>  Staging openssl into destroot
—>  Installing openssl @0.9.8k_0
—>  Activating openssl @0.9.8k_0
—>  Cleaning openssl
—>  Fetching ncursesw
—>  Attempting to fetch ncurses-5.7.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/ncurses
—>  Attempting to fetch ncurses-5.7.tar.gz from http://distfiles.macports.org/ncurses
—>  Verifying checksum(s) for ncursesw
—>  Extracting ncursesw
—>  Configuring ncursesw
—>  Building ncursesw
—>  Staging ncursesw into destroot
—>  Installing ncursesw @5.7_0
—>  Activating ncursesw @5.7_0
—>  Cleaning ncursesw
—>  Fetching ncurses
—>  Verifying checksum(s) for ncurses
—>  Extracting ncurses
—>  Configuring ncurses
—>  Building ncurses
—>  Staging ncurses into destroot
—>  Installing ncurses @5.7_0
—>  Activating ncurses @5.7_0
—>  Cleaning ncurses
—>  Fetching readline
—>  Attempting to fetch readline-6.0.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/readline
—>  Attempting to fetch readline-6.0.tar.gz from http://distfiles.macports.org/readline
—>  Verifying checksum(s) for readline
—>  Extracting readline
—>  Applying patches to readline
—>  Configuring readline
—>  Building readline
—>  Staging readline into destroot
—>  Installing readline @6.0.000_1
—>  Activating readline @6.0.000_1
—>  Cleaning readline
—>  Fetching mysql5
—>  Attempting to fetch mysql-5.0.81.tar.gz from http://mysql.he.net/Downloads/MySQL-5.0/
—>  Verifying checksum(s) for mysql5
—>  Extracting mysql5
—>  Applying patches to mysql5
—>  Configuring mysql5
—>  Building mysql5
—>  Staging mysql5 into destroot
—>  Installing mysql5 @5.0.81_0
—>  Activating mysql5 @5.0.81_0
—>  Cleaning mysql5
—>  Fetching sqlite3
—>  Attempting to fetch sqlite-3.6.14.1.tar.gz from http://distfiles.macports.org/sqlite3/3.6.14.1
—>  Verifying checksum(s) for sqlite3
—>  Extracting sqlite3
—>  Configuring sqlite3
—>  Building sqlite3
—>  Staging sqlite3 into destroot
—>  Installing sqlite3 @3.6.14.1_0
—>  Activating sqlite3 @3.6.14.1_0
—>  Cleaning sqlite3
—>  Fetching apr-util
—>  Attempting to fetch apr-util-1.3.4.tar.bz2 from ftp://ftp.infoscience.co.jp/pub/net/apache/dist/apr
—>  Verifying checksum(s) for apr-util
—>  Extracting apr-util
—>  Configuring apr-util
—>  Building apr-util
—>  Staging apr-util into destroot
—>  Installing apr-util @1.3.4_1+mysql5
—>  Activating apr-util @1.3.4_1+mysql5
—>  Cleaning apr-util
—>  Fetching bzip2
—>  Attempting to fetch bzip2-1.0.5.tar.gz from http://distfiles.macports.org/bzip2
—>  Verifying checksum(s) for bzip2
—>  Extracting bzip2
—>  Applying patches to bzip2
—>  Configuring bzip2
—>  Building bzip2
—>  Staging bzip2 into destroot
—>  Installing bzip2 @1.0.5_2
—>  Activating bzip2 @1.0.5_2
—>  Cleaning bzip2
—>  Fetching pcre
—>  Attempting to fetch pcre-7.9.tar.bz2 from http://nchc.dl.sourceforge.net/pcre
—>  Verifying checksum(s) for pcre
—>  Extracting pcre
—>  Configuring pcre
—>  Building pcre
—>  Staging pcre into destroot
—>  Installing pcre @7.9_0
—>  Activating pcre @7.9_0
—>  Cleaning pcre
—>  Fetching apache2
—>  Attempting to fetch httpd-2.2.11.tar.bz2 from ftp://ftp.infoscience.co.jp/pub/net/apache/dist/httpd
—>  Verifying checksum(s) for apache2
—>  Extracting apache2
—>  Applying patches to apache2
—>  Configuring apache2
—>  Building apache2
—>  Staging apache2 into destroot
—>  Creating launchd control script
###########################################################
# A startup item has been generated that will aid in
# starting apache2 with launchd. It is disabled
# by default. Execute the following command to start it,
# and to cause it to launch at startup:
#
# sudo launchctl load -w /Library/LaunchDaemons/org.macports.apache2.plist
###########################################################
Warning: apache2 requests to install files outside the common directory structure!
—>  Installing apache2 @2.2.11_0+darwin_9
—>  Activating apache2 @2.2.11_0+darwin_9
—>  Cleaning apache2
—>  Fetching gettext
—>  Attempting to fetch gettext-0.17.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/gettext
—>  Attempting to fetch gettext-0.17.tar.gz from http://distfiles.macports.org/gettext
—>  Verifying checksum(s) for gettext
—>  Extracting gettext
—>  Applying patches to gettext
—>  Configuring gettext
—>  Building gettext
—>  Staging gettext into destroot
—>  Installing gettext @0.17_4
—>  Activating gettext @0.17_4
—>  Cleaning gettext
—>  Fetching gawk
—>  Attempting to fetch gawk-3.1.6.tar.bz2 from ftp://ftp.dti.ad.jp/pub/GNU/gawk
—>  Attempting to fetch gawk-3.1.6.tar.bz2 from http://distfiles.macports.org/gawk
—>  Verifying checksum(s) for gawk
—>  Extracting gawk
—>  Configuring gawk
—>  Building gawk
—>  Staging gawk into destroot
—>  Installing gawk @3.1.6_0
—>  Activating gawk @3.1.6_0
—>  Cleaning gawk
—>  Fetching m4
—>  Attempting to fetch m4-1.4.13.tar.bz2 from ftp://ftp.dti.ad.jp/pub/GNU/m4
—>  Attempting to fetch m4-1.4.13.tar.bz2 from http://distfiles.macports.org/m4
—>  Verifying checksum(s) for m4
—>  Extracting m4
—>  Applying patches to m4
—>  Configuring m4
—>  Building m4
—>  Staging m4 into destroot
—>  Installing m4 @1.4.13_0
—>  Activating m4 @1.4.13_0
—>  Cleaning m4
—>  Fetching perl5.8
—>  Attempting to fetch perl-5.8.9.tar.bz2 from http://distfiles.macports.org/perl5.8
—>  Verifying checksum(s) for perl5.8
—>  Extracting perl5.8
—>  Applying patches to perl5.8
—>  Configuring perl5.8
—>  Building perl5.8
—>  Staging perl5.8 into destroot
—>  Installing perl5.8 @5.8.9_3
—>  Activating perl5.8 @5.8.9_3
—>  Cleaning perl5.8
—>  Fetching perl5
—>  Verifying checksum(s) for perl5
—>  Extracting perl5
—>  Configuring perl5
—>  Building perl5
—>  Staging perl5 into destroot
—>  Installing perl5 @5.8.9_0
—>  Activating perl5 @5.8.9_0
—>  Cleaning perl5
—>  Fetching autoconf213
—>  Attempting to fetch autoconf-2.13.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/autoconf
—>  Attempting to fetch autoconf-2.13.tar.gz from http://distfiles.macports.org/autoconf213
—>  Verifying checksum(s) for autoconf213
—>  Extracting autoconf213
—>  Configuring autoconf213
—>  Building autoconf213
—>  Staging autoconf213 into destroot
—>  Installing autoconf213 @2.13_1
—>  Activating autoconf213 @2.13_1
—>  Cleaning autoconf213
—>  Fetching pkgconfig
—>  Attempting to fetch pkg-config-0.23.tar.gz from http://distfiles.macports.org/pkgconfig
—>  Verifying checksum(s) for pkgconfig
—>  Extracting pkgconfig
—>  Configuring pkgconfig
—>  Building pkgconfig
—>  Staging pkgconfig into destroot
—>  Installing pkgconfig @0.23_1
—>  Activating pkgconfig @0.23_1
—>  Cleaning pkgconfig
—>  Fetching curl
—>  Attempting to fetch curl-7.19.5.tar.bz2 from http://distfiles.macports.org/curl
—>  Verifying checksum(s) for curl
—>  Extracting curl
—>  Configuring curl
—>  Building curl
—>  Staging curl into destroot
—>  Installing curl @7.19.5_0
—>  Activating curl @7.19.5_0
—>  Cleaning curl
—>  Fetching freetype
—>  Attempting to fetch freetype-2.3.9.tar.bz2 from http://nchc.dl.sourceforge.net/freetype
—>  Attempting to fetch freetype-doc-2.3.9.tar.bz2 from http://nchc.dl.sourceforge.net/freetype
—>  Verifying checksum(s) for freetype
—>  Extracting freetype
—>  Applying patches to freetype
—>  Configuring freetype
—>  Building freetype
—>  Staging freetype into destroot
—>  Installing freetype @2.3.9_0+macosx
—>  Activating freetype @2.3.9_0+macosx
—>  Cleaning freetype
—>  Fetching gsed
—>  Attempting to fetch sed-4.2.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/sed
—>  Attempting to fetch sed-4.2.tar.gz from http://distfiles.macports.org/gsed
—>  Verifying checksum(s) for gsed
—>  Extracting gsed
—>  Configuring gsed
—>  Building gsed
—>  Staging gsed into destroot
—>  Installing gsed @4.2_0
—>  Activating gsed @4.2_0
—>  Cleaning gsed
—>  Fetching jpeg
—>  Attempting to fetch jpegsrc.v6b.tar.gz from http://distfiles.macports.org/jpeg
—>  Attempting to fetch droppatch.tar.gz from http://distfiles.macports.org/jpeg
—>  Verifying checksum(s) for jpeg
—>  Extracting jpeg
—>  Applying patches to jpeg
—>  Configuring jpeg
—>  Building jpeg
—>  Staging jpeg into destroot
—>  Installing jpeg @6b_3
—>  Activating jpeg @6b_3
—>  Cleaning jpeg
—>  Fetching libmcrypt
—>  Attempting to fetch libmcrypt-2.5.8.tar.bz2 from ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
—>  Attempting to fetch libmcrypt-2.5.8.tar.bz2 from ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/
—>  Attempting to fetch libmcrypt-2.5.8.tar.bz2 from ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ports/distfiles/
—>  Attempting to fetch libmcrypt-2.5.8.tar.bz2 from ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/
—>  Attempting to fetch libmcrypt-2.5.8.tar.bz2 from http://nchc.dl.sourceforge.net/mcrypt
—>  Verifying checksum(s) for libmcrypt
—>  Extracting libmcrypt
—>  Configuring libmcrypt
—>  Building libmcrypt
—>  Staging libmcrypt into destroot
—>  Installing libmcrypt @2.5.8_1
—>  Activating libmcrypt @2.5.8_1
—>  Cleaning libmcrypt
—>  Fetching libpng
—>  Attempting to fetch libpng-1.2.35.tar.bz2 from http://nchc.dl.sourceforge.net/libpng
—>  Verifying checksum(s) for libpng
—>  Extracting libpng
—>  Configuring libpng
—>  Building libpng
—>  Staging libpng into destroot
—>  Installing libpng @1.2.35_0
—>  Activating libpng @1.2.35_0
—>  Cleaning libpng
—>  Fetching p5-locale-gettext
—>  Attempting to fetch gettext-1.05.tar.gz from ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Locale
—>  Verifying checksum(s) for p5-locale-gettext
—>  Extracting p5-locale-gettext
—>  Applying patches to p5-locale-gettext
—>  Configuring p5-locale-gettext
—>  Building p5-locale-gettext
—>  Staging p5-locale-gettext into destroot
—>  Installing p5-locale-gettext @1.05_0
—>  Activating p5-locale-gettext @1.05_0
—>  Cleaning p5-locale-gettext
—>  Fetching help2man
—>  Attempting to fetch help2man-1.36.4.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/help2man
—>  Attempting to fetch help2man-1.36.4.tar.gz from http://distfiles.macports.org/help2man
—>  Verifying checksum(s) for help2man
—>  Extracting help2man
—>  Applying patches to help2man
—>  Configuring help2man
—>  Building help2man
—>  Staging help2man into destroot
—>  Installing help2man @1.36.4_1
—>  Activating help2man @1.36.4_1
—>  Cleaning help2man
—>  Fetching autoconf
—>  Attempting to fetch autoconf-2.63.tar.bz2 from ftp://ftp.dti.ad.jp/pub/GNU/autoconf
—>  Attempting to fetch autoconf-2.63.tar.bz2 from http://distfiles.macports.org/autoconf
—>  Verifying checksum(s) for autoconf
—>  Extracting autoconf
—>  Configuring autoconf
—>  Building autoconf
—>  Staging autoconf into destroot
—>  Installing autoconf @2.63_0
—>  Activating autoconf @2.63_0
—>  Cleaning autoconf
—>  Fetching automake
—>  Attempting to fetch automake-1.11.tar.bz2 from ftp://ftp.dti.ad.jp/pub/GNU/automake
—>  Attempting to fetch automake-1.11.tar.bz2 from http://distfiles.macports.org/automake
—>  Verifying checksum(s) for automake
—>  Extracting automake
—>  Configuring automake
—>  Building automake
—>  Staging automake into destroot
—>  Installing automake @1.11_0
—>  Activating automake @1.11_0
—>  Cleaning automake
—>  Fetching libtool
—>  Attempting to fetch libtool-2.2.6a.tar.gz from ftp://ftp.dti.ad.jp/pub/GNU/libtool
—>  Attempting to fetch libtool-2.2.6a.tar.gz from http://distfiles.macports.org/libtool
—>  Verifying checksum(s) for libtool
—>  Extracting libtool
—>  Configuring libtool
—>  Building libtool
—>  Staging libtool into destroot
—>  Installing libtool @2.2.6a_0
—>  Activating libtool @2.2.6a_0
—>  Cleaning libtool
—>  Fetching libxml2
—>  Attempting to fetch libxml2-2.7.3.tar.gz from http://ftp.nara.wide.ad.jp/pub/X11/GNOME/sources/libxml2/2.7/
—>  Attempting to fetch libxml2-2.7.3.tar.gz from ftp://ftp.nara.wide.ad.jp/pub/X11/GNOME/sources/libxml2/2.7/
—>  Attempting to fetch libxml2-2.7.3.tar.gz from http://distfiles.macports.org/libxml2
—>  Verifying checksum(s) for libxml2
—>  Extracting libxml2
—>  Configuring libxml2
—>  Building libxml2
—>  Staging libxml2 into destroot
—>  Installing libxml2 @2.7.3_0
—>  Activating libxml2 @2.7.3_0
—>  Cleaning libxml2
—>  Fetching libxslt
—>  Attempting to fetch libxslt-1.1.24.tar.gz from http://distfiles.macports.org/libxslt
—>  Verifying checksum(s) for libxslt
—>  Extracting libxslt
—>  Configuring libxslt
—>  Building libxslt
—>  Staging libxslt into destroot
—>  Installing libxslt @1.1.24_2
—>  Activating libxslt @1.1.24_2
—>  Cleaning libxslt
—>  Fetching mhash
—>  Attempting to fetch mhash-0.9.9.9.tar.bz2 from http://nchc.dl.sourceforge.net/mhash
—>  Verifying checksum(s) for mhash
—>  Extracting mhash
—>  Configuring mhash
—>  Building mhash
—>  Staging mhash into destroot
—>  Installing mhash @0.9.9.9_0
—>  Activating mhash @0.9.9.9_0
—>  Cleaning mhash
—>  Fetching tiff
—>  Attempting to fetch tiff-3.8.2.tar.gz from ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
—>  Verifying checksum(s) for tiff
—>  Extracting tiff
—>  Applying patches to tiff
—>  Configuring tiff
—>  Building tiff
—>  Staging tiff into destroot
—>  Installing tiff @3.8.2_3+macosx
—>  Activating tiff @3.8.2_3+macosx
—>  Cleaning tiff
—>  Fetching php5
—>  Attempting to fetch php-5.2.9.tar.bz2 from http://distfiles.macports.org/php5
—>  Verifying checksum(s) for php5
—>  Extracting php5
—>  Applying patches to php5
—>  Configuring php5
—>  Building php5
—>  Staging php5 into destroot
Warning: php5 requests to install files outside the common directory structure!
—>  Installing php5 @5.2.9_2+apache2+macosx+mysql5+pear
—>  Activating php5 @5.2.9_2+apache2+macosx+mysql5+pear
To customize php, copy
/opt/local/etc/php5/php.ini-dist (if this is a development server) or
/opt/local/etc/php5/php.ini-recommended (if this is a production server) to
/opt/local/etc/php5/php.ini and then make changes.

If this is your first install, you need to activate PHP in your web server.

To enable PHP in Apache, run
cd /opt/local/apache2/modules
/opt/local/apache2/bin/apxs -a -e -n “php5″ libphp5.so
—>  Cleaning php5

長々とコピペしたが今後の参考の為に・・・

Pearを最新に

sudo pear channel-update pear.php.net
sudo pear list-upgrades
sudo pear upgrade PEAR

おまじないが終わったらSymfonyのインストール．

sudo pear channel-discover pear.symfony-project.com
sudo pear install symfony/symfony

…

sh-3.2# pear channel-discover pear.symfony-project.com
Adding Channel “pear.symfony-project.com” succeeded
Discovery of channel “pear.symfony-project.com” succeeded
sh-3.2# pear install symfony/symfony
downloading symfony-1.2.7.tgz …
Starting to download symfony-1.2.7.tgz (2,695,475 bytes)
…………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….done: 2,695,475 bytes
install ok: channel://pear.symfony-project.com/symfony-1.2.7

バージョン確認

sh-3.2# symfony -V
symfony version 1.2.7 (/opt/local/lib/php/symfony)

Done.

]]> http://blog.dig.io/2009/05/25/mac%e3%81%a7symfony/feed/ 0 MacにPort http://blog.dig.io/2009/05/25/mac%e3%81%abports%e3%82%92%e3%82%a4%e3%83%b3%e3%82%b9%e3%83%88%e3%83%bc%e3%83%ab/ http://blog.dig.io/2009/05/25/mac%e3%81%abports%e3%82%92%e3%82%a4%e3%83%b3%e3%82%b9%e3%83%88%e3%83%bc%e3%83%ab/#comments Mon, 25 May 2009 05:45:19 +0000 digio http://blog.digio.info/?p=54 MacにPortをインストールする。

目的はローカル環境でSymfonyの開発環境を構築するため。

手順は簡単。

http://www.macports.org/install.php

よりDMGをダウンロード。インストーラに従いインストールするだけ。

FreeBSD派なので。


]]> http://blog.dig.io/2009/05/25/mac%e3%81%abports%e3%82%92%e3%82%a4%e3%83%b3%e3%82%b9%e3%83%88%e3%83%bc%e3%83%ab/feed/ 0 Docアイコン巨大化 http://blog.dig.io/2009/05/02/doc%e3%82%a2%e3%82%a4%e3%82%b3%e3%83%b3%e5%b7%a8%e5%a4%a7%e5%8c%96/ http://blog.dig.io/2009/05/02/doc%e3%82%a2%e3%82%a4%e3%82%b3%e3%83%b3%e5%b7%a8%e5%a4%a7%e5%8c%96/#comments Sat, 02 May 2009 07:56:52 +0000 digio http://blog.digio.info/?p=49 ふと見た古い雑誌にあったMacOSのカスタマイズTips。

“Docのアイコンを巨大化する”というもの。

~/Library/Preferences/com.apple.dock.plist のlargesizeを任意の値にするだけ。

picture-1

GUIのシステム環境設定上からは上限が128pxに設定されているので、それ以上のサイズにできるのだが。

あまりに大きくしても、アイコンが粗くなるだけで意味無し。

150px位で落ち着いた。

picture-2

]]> http://blog.dig.io/2009/05/02/doc%e3%82%a2%e3%82%a4%e3%82%b3%e3%83%b3%e5%b7%a8%e5%a4%a7%e5%8c%96/feed/ 0